Template:Convert

Template documentationviewedithistorypurge

For currency conversion, see Template:To USD and Template:To EUR.

For inflation conversion, see Template:Inflation.

Template {{convert}} calculates a measurement value (number × unit) into the same measurement by a different unit, and then presents the results, formatted. See also the unit symbols recognized by this template.

For example:

{{convert|2|km|mi}} → 2 kilometres (1.2 mi) (km entered, converted into miles)

{{convert|7|mi|km}} → 7 miles (11 km) (mi entered, converted into km)

Numbers can be rounded, units can be abbreviated into symbols:

{{convert|2|km|mi|2|abbr=on}} → 2 km (1.24 mi)

{{convert|7|mi|km|2|abbr=on}} → 7 mi (11.27 km)

Value ranges can be entered using |to|... or |-|...:

{{convert|2|to|5|km|mi}} → 2 to 5 kilometres (1.2 to 3.1 mi)

{{convert|2|-|5|km|mi}} → 2–5 kilometres (1.2–3.1 mi)

Combined effect example:

{{convert|2|-|5|km|mi|2|abbr=on}} → 2–5 km (1.24–3.11 mi)

{{convert|2|and|5|km|mi|sigfig=3|abbr=off}} → 2 and 5 kilometres (1.24 and 3.11 miles)

See Help:Convert for more detailed, technical information

Units to convert

See also: the summary at Complete list of units for {{Convert}} and the complete list at Module:Convert/documentation/conversion data

Enter units to convert from into:

• {{convert|1|lb|kg}} → 1 pound (0.45 kg)

SI units generally accept prefixes, like "m" for milli (10⁻³), and "M" for mega (10⁶)

For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)

For three-unit units, etc., see Category:Convert-like templates

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):

• {{convert|1|lb|kg}} → 1 pound (0.45 kg)

Using |abbr=in shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:

• {{convert|1|lb|kg|abbr=in}} → 1 lb (0.45 kilograms)

To abbreviate both or neither:

• {{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)
• {{convert|1|lb|kg|abbr=off}} → 1 pound (0.45 kilograms)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on as the default behavior. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 lb (0.45 kg)

is equivalent to:

{{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)

Adjective: a 10-mile distance

Use |adj=on to produce the adjectival (hyphenated) form:

• A {{convert|10|mi|km|adj=on}} distance → A 10-mile (16 km) distance.

Default behavior, for comparison:

• {{convert|10|mi|km}} to go → 10 miles (16 km) to go.

|adj=on does not produce hyphens with unit symbols, as per Manual of Style:

• A {{convert|9|in|cm|adj=on|abbr=on}} nail → A 9 in (23 cm) nail.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

See Help:Convert § Rounding for a more mathematical description of the rounding options

By definition, 100 ft equals 30.48 m. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with an integer as the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of Template:Frac to the power of this integer. For instance, if the result is 8621 and the rounding parameter is "−2", 8600 will be displayed. If the result is "123.456" and the parameter is "0", 123 will be displayed. Essentially a positive or zero rounding parameter specifies the number of decimal places; a negative value specifies the number of trailing zeroes.

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	123 feet (40 m)
{{convert|123|ft|m}}	123 feet (37 m)	same output with precision 0 or <default>
{{convert|123|ft|m|0}}	123 feet (37 m)
{{convert|123|ft|m|1}}	123 feet (37.5 m)
{{convert|123|ft|m|2}}	123 feet (37.49 m)	123 feet is exactly 37.4904 m which is rounded to 37 m if precision is not specified
{{convert|500|ft|m|-1}}	500 feet (150 m)	same output with precision -1 or <default>, because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
{{convert|500|ft|m}}	500 feet (150 m)
{{convert|500|ft|m|0}}	500 feet (152 m)
{{convert|500|ft|m|1}}	500 feet (152.4 m)
{{convert|500|ft|m|2}}	500 feet (152.40 m)	exact value is 152.4 m
{{convert|500|ft|cm|-3}}	500 feet (15,000 cm)	same output with precision -3 or <default>, because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
{{convert|500|ft|cm}}	500 feet (15,000 cm)
{{convert|500|ft|cm|0}}	500 feet (15,240 cm)

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} → 1,200 feet (365.8 m)
• {{convert|1200|ft|m|sigfig=3}} → 1,200 feet (366 m)
• {{convert|1200|ft|m|sigfig=2}} → 1,200 feet (370 m)
• {{convert|1200|ft|m|sigfig=1}} → 1,200 feet (400 m)

Default behavior, for comparison:

• {{convert|1200|ft|m}} → 1,200 feet (370 m)

Setting |sigfig= to a value less than 1 is meaningless:

• {{convert|1200|ft|m|sigfig=0}} → 1,200 feet (370 m) Template:Nay

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → 10 metres (33 ft)
• {{convert|10|m|ft|round=5}} → 10 metres (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → 10 metres (33 ft)
• {{convert|10|m|ft|round=25}} → 10 metres (25 ft)

Default behavior, for comparison:

• {{convert|10|m|ft|sigfig=4}} → 10 metres (32.81 ft)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → 10 by 200 by 3,000 metres (33 ft × 656 ft × 9,843 ft)
• {{convert|10 x 200 x 3000|m|ft|round=each}} → 10 by 200 by 3,000 metres (33 ft × 660 ft × 9,800 ft)

Round to a multiple of a given fraction: Template:Frac inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in Template:Frac).

• {{convert|5.56|cm|in|frac=16}} → 5.56 centimetres (2+3⁄16 in)
• {{convert|8|cm|in|frac=4}} → 8 centimetres (3+1⁄4 in)

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} → 8 centimetres (3+3⁄20 in)

Default behavior uses decimal notation:

• {{convert|5.56|cm|in}} → 5.56 centimetres (2.19 in)

Rounding temperatures: °C, °F and K

In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → 10,000 °C (18,000 °F; 10,300 K)
2. {{convert|10,000.1|C|F K}} → 10,000.1 °C (18,032.2 °F; 10,273.2 K)
3. {{convert|-272|C|F K}} → −272 °C (−457.60 °F; 1.15 K)
4. {{convert|-272|C}} → −272 °C (−457.60 °F)
5. {{convert|100|C|F K}} → 100 °C (212 °F; 373 K)
6. {{convert|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10,000 °C (18,032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10,000 °C (18,032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is six now, whereas before kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the kelvins conversion generated the fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the kelvins conversion.

Rounding input

There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}} or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.

To round the input to a specified number of digits after the decimal point, use one of the parameters:

• |adj=ri0
• |adj=ri1
• |adj=ri2
• |adj=ri3

Note that it is not possible to round above the decimal place (|adj=ri-1Template:Nay is invalid). Neither is there support for significant figures, multiples of a number, or any other output-rounding feature.

The default precision is computed based on the input, so an explicit output precision must usually be supplied:

• {{convert|4.14159|mi|km|adj=ri0}} → 4 miles (6.66524 km) Template:Nay (precisions are mismatched)
• {{convert|4.14159|mi|km|0|adj=ri0}} → 4 miles (7 km) Y

In this case, if the input were rounded before conversion, a different result would be obtained:

• {{convert|{{#expr:4.14159 round 0}}|mi|km|0}} → 4 miles (6 km) Template:Nay (rounds intermediate calculation, giving a different result)

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
• {{convert|5|km|mi nmi}} → 5 kilometres (3.1 mi; 2.7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see § In input and § In output.

Ranges of values

For a conversion of a difference, see § Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Template:Navbar-header

Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 feet (0.91–1.83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3–6 feet (0.91–1.83 m)
and	{{convert|3|and|6|ft}}	3 and 6 feet (0.91 and 1.83 m)
and(-)	{{convert|3|and(-)|6|ft}}	3 and 6 feet (0.91–1.83 m)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 and 6 ft (0.91–1.83 m)
or	{{convert|3|or|6|ft}}	3 or 6 feet (0.91 or 1.83 m)
to	{{convert|3|to|6|ft}}	3 to 6 feet (0.91 to 1.83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 feet (0.91–1.83 m)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 to 6 ft (0.91–1.83 m)
to about	{{convert|3|to about|6|ft}}	3 to about 6 feet (0.91 to about 1.83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
± ±	{{convert|3|±|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
+	{{convert|3|+|6|ft}}	3 + 6 feet (0.91 + 1.83 m)
,	{{convert|3|,|6|ft}}	3, 6 feet (0.91, 1.83 m)
, and	{{convert|3|, and|6|ft}}	3, and 6 feet (0.91, and 1.83 m)
, or	{{convert|3|, or|6|ft}}	3, or 6 feet (0.91, or 1.83 m)
by	{{convert|3|by|6|ft}}	3 by 6 feet (0.91 by 1.83 m)
x	{{convert|3|x|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)	|abbr=on abbreviates and repeats the first unit
× ×	{{convert|3|×|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0.91 m × 1.83 m)
xx	|xx| is deprecated. Use Template:Mxt instead
*	|*| is deprecated. Use Template:Mxt instead

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use by:

• {{convert|6|by|12|ft|m}} → 6 by 12 feet (1.8 by 3.7 m)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → 6 by 12 metres (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

Lists of values: 20, 40, or 60 miles

{{convert|20|,|40|, or|60|mi}} → 20, 40, or 60 miles (32, 64, or 97 km)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 foot 3 inches () Template:Nay

Default behavior, for comparison:

• {{convert|1|ft|3|in|mm}} → 1 foot 3 inches (380 mm)

However, converting metric units into feet and inches with |order=flip can produce the desired output:

• {{convert|380|x|1040|mm|ftin|order=flip}} → 1 foot 3 inches by 3 feet 5 inches (380 mm × 1,040 mm)

Words

Spelling of unit name: international metre or US meter?

Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 metre (3.3 ft)—default

{{convert|1|m|ft|sp=us}} → 1 meter (3.3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → 10 miles (16,000 m)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} →

To make the first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → 10 miles (16,000 m)
• {{convert|10|mi|m|spell=On}} →

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → 4 planted acres (1.6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → 4 planted acres (1.6 planted ha)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted acres (1.6 reforested-ha)

After adjective unit: A 10-foot-long corridor

Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.

{{convert|10|ft|m|adj=mid|-long}} → 10-foot-long (3.0 m)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → 1 metre (3 ft 3 in)
• {{convert|2|metre}} → 2 metres (6 ft 7 in)
• {{convert|2|metre|abbr=on}} → 2 m (6 ft 7 in)

Exception

Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → 100 foot (30 metres)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert|3+1/2|oz|g|spell=in}} → 3+1⁄2 ounces (99 g)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert|1/8|imppt|ml|spell=in|adj=pre|of an}} → 1⁄8 of an imperial pint (71 ml)

Wrapping and line breaking

To comply with MOS:UNITNAMES, convert uses   before a symbol (Template:Tq) but a space before a unit name (Template:Tq).

Spelling out "thousands", "millions", etc.

Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).

• {{convert|100|e6mi|e6km}} → 100 million miles (160×10^⁶ km)
• {{convert|120|e6acre}} → 120 million acres (490,000 km²)
• {{convert|120|e6acre|e3km2}} → 120 million acres (490×10^³ km²)

To display both input and output in scientific notation, use |abbr=on

• {{convert|100|e6mi|e6km|abbr=on}} → 100×10^⁶ mi (160×10^⁶ km)

To spell out "thousands", "millions", etc., |abbr=unit abbreviates the unit; |abbr=off displays both full unit names.

• {{convert|100|e6mi|e6km|abbr=unit}} → 100 million mi (160 million km)
• {{convert|100|e6mi|e6km|abbr=off}} → 100 million miles (160 million kilometres)

Numbers

Using an SI prefix: gigametre (Gm), or micrometre (μm)

Metric prefixes

Text	Symbol	Factor
quetta	Q	1030
ronna	R	1027
yotta	Y	1024
zetta	Z	1021
exa	E	1018
peta	P	1015
tera	T	1012
giga	G	109
mega	M	106
kilo	k	103
hecto	h	102
deca	da	101
(none)		1
deci	d	10−1
centi	c	10−2
milli	m	10−3
micro	μ	10−6
nano	n	10−9
pico	p	10−12
femto	f	10−15
atto	a	10−18
zepto	z	10−21
yocto	y	10−24
ronto	r	10−27
quecto	q	10−30

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigametre. These are plain multiplication factors.

To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:

• 12 Gm (1.2×10¹⁰ m)
• 12 μm (1.2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for metre):

• {{convert|12|Gm|mi|abbr=on}} → 12 Gm (7,500,000 mi)
• Mm: 12 Mm (7,500 mi)
• km: 12 km (39,000 ft)
• mm: 12 mm (0.47 in)
• μm: 12 μm (0.012 mm)
• um: 12 μm (0.012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → 12,000 mi (19 Mm)
• {{convert|12|in|μm|abbr=on}} → 12 in (300,000 μm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too:

• {{convert|12|μm|μin|abbr=on}} → 12 μm (470 μin)

Further information: Help:Convert units § SI prefixes

Engineering notation: 7 million km

Engineering notation can be entered with a prefix to the unit:

• {{convert|70|e6m}} → 70 million metres (230,000,000 ft)
• {{convert|70|e6m|abbr=on}} → 70×10^⁶ m (230,000,000 ft)

The same is possible for the output unit:

• {{convert|230,000,000|ft|e6m}} → 230,000,000 feet (70×10^⁶ m)

The prefixes are:

• e3 (thousand)
• e6 (million)
• e9 (billion)
• e12 (trillion)
• e15 (quadrillion)

Engineering notation may use "e" or "E", for example, e3km or E3km. Using uppercase E3km displays the factor as a word ("thousand") rather than as ×10³. Using lowercase e3km displays the word if abbr=unit is used, or if abbr=off applies to the unit.

• {{convert|70|e6m|e6ft}} → 70 million metres (230×10^⁶ ft)
• {{convert|70|e6m|e6ft|abbr=off}} → 70 million metres (230 million feet)
• {{convert|70|e6m|e6ft|abbr=unit}} → 70 million m (230 million ft)
• {{convert|70|E6m|e6ft|abbr=in}} → 70 million m (230 million feet)

Scientific notation: 1.23 × 10⁻¹⁴

In scientific notation, a number is written like 1.23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10⁻¹⁵ atm (1.23×10⁻¹⁴ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10⁻⁸ atm)

Input with fractions: 1+1⁄2 inches (38.1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} → 1⁄2 inch (12.7 mm)
• {{convert|1⁄2|in|mm|1}} → 1⁄2 inch (12.7 mm)

With positive mixed numbers (a positive integer and a fraction), use a + sign

• {{convert|2+1⁄2|in|mm|1}} → 2+1⁄2 inches (63.5 mm)

With negative mixed numbers, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} → −2+1⁄2 inches (−63.5 mm)

Note that the following cases are not interpreted as mixed numbers:

• {{convert|2-1⁄2|in|mm|1}} → 2–1⁄2 inch (50.8–12.7 mm). This is interpreted as a range from 2 inches to 1⁄2 inch.
• {{convert|-2+1⁄2|in|mm|1}} → Template:Nay This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.
• {{convert|2+½|in|mm|1}} → Template:Nay Fractions consisting of a single Unicode character are not allowed either.

Horizontal fraction bar: ⁠1/2⁠ inch

Using a double slash (//) provides a horizontal fraction bar for the original (input) unit:

• {{convert|1//2|in|mm|1}} → 1/2 inch (12.7 mm)
• {{convert|6+3//8|in|mm|1}} → 6+3/8 inches (161.9 mm)

Using a negative value for |frac= provides a horizontal fraction bar for the converted (output) unit:

• {{convert|12.7|mm|frac=-2}} → 12.7 millimetres (1/2 in)
• {{convert|161.9|mm|frac=-8}} → 161.9 millimetres (6+3/8 in)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → 1234567 metres (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → 1234567 metres (4050417 ft)

Default behavior, for comparison:

• {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft)

Setting |comma=5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → 1234 metres (4049 ft)
• {{convert|1234567|m|ft|comma=5}} → 1,234,567 metres (4,050,417 ft)

Default behavior, for comparison:

• {{convert|1234|m|ft}} → 1,234 metres (4,049 ft)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, semicolon, or, br, br(), x|…:

• {{convert|10|m|ft|disp=sqbr}} → 10 metres [33 ft]
• {{convert|10|m|ft|disp=comma}} → 10 metres, 33 ft
• {{convert|10|m|ft|disp=semicolon}} → 10 metres; 33 ft
• {{convert|10|m|ft|disp=or}} → 10 metres or 33 feet

Default behavior, for comparison:

• {{convert|10|m|ft}} → 10 metres (33 ft)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → 10 metres
  33 feet

Also |disp=br() will force a new line, and keep the brackets (useful in tables):

• {{convert|10|m|ft|disp=br()}} → 10 metres
  (33 feet)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → 10 metres_MyText_33 ft (To display spaces, use  )

Flipping (reordering) the two measurements: 1,609.3 metres (1 mile)

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} → 1,609.3 metres (1 mile)

Default behavior, for comparison:

• {{convert|1|mi|m}} → 1 mile (1,609.3 metres)

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} → 6.2137 miles; 5.3996 nautical miles (10 kilometres)
• {{convert|10|km|nmi mi|order=flip}} → 5.3996 nautical miles; 6.2137 miles (10 kilometres)

Fixed ordering of output units: 212 °F (100 °C; 373 K)

Setting |order=out shows the output-units as ordered; the input unit is skipped:

• {{convert|100|C|F C K|abbr=on|order=out}} → 212 °F (100 °C; 373 K)
• {{convert|200|PS|kW hp|0|abbr=on|order=out}} → 147 kW (197 hp)

See also: § Displaying parts of the output.

Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.

Note: in Convert, abbr is synonym for unit symbol

Convert	Returns	Components
{{convert|2|cuyd|m3}}	2 cubic yards (1.5 m3)	all (default conversion)
{{convert|2|cuyd|m3|abbr=on}}	2 cu yd (1.5 m3)	all (default conversion, abbr)
{{convert|2|cuyd|m3|abbr=values}}	2 (1.5)	numbers only
{{convert|2|cuyd|cuyd|disp=out}}	2.0 cu yd	input value (workaround)
{{convert|2|cuyd|cuyd|disp=out|abbr=on}}	2.0 cu yd	input value abbr (workaround)
{{convert|2|cuyd|m3|disp=unit}}	cubic yards	input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	cubic-yard	input unit, adjectival (hyphenated)
{{convert|2|cuyd|m3|disp=unit|adj=on|abbr=on}}	cu yd	input unit, adjectival (abbr so not hyphenated)
{{convert|2|cuyd|m3|disp=unit|abbr=on}}	cu yd	input unit abbr
{{convert|2|cuyd|m3|disp=out}}	1.5 m3	output value, symbols
{{convert|2|cuyd|m3|disp=out|abbr=off}}	1.5 cubic metres	output value, names
{{convert|2|cuyd|m3|disp=out|adj=on}}	1.5-cubic-metre	output, adjective
{{convert|2|cuyd|m3|disp=number}}	1.5	output number
{{convert|2|cuyd|m3|disp=unit2}}	m3	output unit (abbr by default)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	cubic metres	output unit (name)
{{convert|2|cuyd|m3|disp=unit2|abbr=on}}	m3	output unit (abbr)

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → 2 kilopascals [kPa] (0.29 psi)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-kilopascal [kPa] (0.29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 kilometres 62 miles	100 kilometres (62 miles)

Table columns

Using {convert} in a table cell, with |disp=table splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr= parameter. Multiple-unit outputs, like ftin, always output their units to the table.

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|10 |style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20 |style="text-align:center;"|66

The units are added as a column header:

	kilograms	pounds	stone and pounds
|disp=table	10	22	1 st 8 lb
|disp=table and |abbr=on	20 kg	44 lb	3 st 2 lb
|disp=table and |abbr=off	30 kilograms	66 pounds	4 stone 10 pounds
|disp=tablecen	40	88	6 st 4 lb
|disp=<other> (default)	50 kilograms (110 lb; 7 st 12 lb)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)

showing: 10 metres (33 ft).

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	m	ft
A	15.75 m	15+3⁄4	52
B	15.5 m	15.5	51
C	16 m	16.0	52.5
D	16 m	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

The conversion factors and physical constants are sourced here.

All units

Units are case-sensitive: use Template:Xt, not KW or kw

The table below lists units supported by {{convert}} or {{cvt}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.

{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:

• {{convert|100|kg|lb}} → 100 kilograms (220 lb)
• {{convert|100|lb|kg}} → 100 pounds (45 kg)

The unit-codes should be treated as case-sensitive:

• {{convert|100|Mm|mm}} → 100 megametres (1.0×10¹¹ mm)

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.

• {{convert|55|nmi|km mi}} → 55 nautical miles (102 km; 63 mi)
• {{convert|1|oz|ozt g gr}} → 1 ounce (0.91 ozt; 28 g; 440 gr)

Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F (F). Either may be entered for Fahrenheit (but not a lower-case f).

Supported units

Explanation

Explanation

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template		symbols shown in output	other notes about the units	sample of the default conversion for the unit	output codes for multiple conversions

Area

Area
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	square kilometre	km2		km2	US spelling: square kilometer	1.0 km2 (0.39 sq mi)	km2 sqmi
	square metre	m2		m2	US spelling: square meter	1.0 m2 (11 sq ft)	m2 sqft
	square centimetre	cm2		cm2	US spelling: square centimeter	1.0 cm2 (0.16 sq in)	cm2 sqin
	square millimetre	mm2		mm2	US spelling: square millimeter	1.0 mm2 (0.0016 sq in)	mm2 sqin
non-SI metric	hectare	ha		ha		1.0 ha (2.5 acres)
Imperial & US customary	square mile	sqmi		sq mi		1.0 sq mi (2.6 km2)	sqmi km2
	acre	acre		(none)		1.0 acre (0.40 ha)
	square yard	sqyd		sq yd		1.0 sq yd (0.84 m2)
	square foot	sqft (sqfoot)		sq ft	long code "sqfoot" outputs square foot (and never feet)	1.0 sq ft (0.093 m2)	sqft m2 (sqfoot m2)
	square inch	sqin		sq in		1.0 sq in (6.5 cm2)	sqin cm2
Other	square nautical mile	sqnmi		sq nmi		1.0 sq nmi (3.4 km2; 1.3 sq mi)
	dunam	dunam		(none)	For alternative spellings and definitions see the full list	1.0 dunam (0.0010 km2; 0.00039 sq mi)
	tsubo	tsubo		(none)		1.0 tsubo (3.3 m2)

Density

Density

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
Metric	kilogram per cubic metre	kg/m3		kg/m3		1.0 kg/m3 (1.7 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	gram per cubic metre	g/m3		g/m3		1.0 g/m3 (0.0017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	pound per cubic foot	lb/ft3		lb/cu ft		1.0 lb/cu ft (0.016 g/cm3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	pound per cubic yard	lb/yd3		lb/cu yd		1.0 lb/cu yd (0.59 kg/m3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)

Energy

Energy
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	gigajoule	GJ		GJ		1.0 GJ (280 kWh)
	megajoule	MJ		MJ		1.0 MJ (0.28 kWh)
	kilojoule	kJ		kJ		1.0 kJ (240 cal)
	hectojoule	hJ		hJ		1.0 hJ (24 cal)
	decajoule	daJ		daJ		1.0 daJ (2.4 cal)
	joule	J		J		1.0 J (0.24 cal)
	decijoule	dJ		dJ		1.0 dJ (0.024 cal)
	centijoule	cJ		cJ		1.0 cJ (0.0024 cal)
	millijoule	mJ		mJ		1.0 mJ (0.00024 cal)
	microjoule	μJ (uJ)		μJ		1.0 μJ (2.4×10−7 cal)
	nanojoule	nJ		nJ		1.0 nJ (2.4×10−10 cal)
cgs	megaerg	Merg		Merg		1.0 Merg (0.10 J)
	kiloerg	kerg		kerg		1.0 kerg (0.10 mJ)
	erg	erg		(none)		1.0 erg (0.10 μJ)
Watt-hour multiples	terawatt-hour	TWh		TWh		1.0 TWh (3.6 PJ)
		TW.h		TW⋅h
	gigawatt-hour	GWh		GWh		1.0 GWh (3.6 TJ)
		GW.h		GW⋅h
	megawatt-hour	MWh		MWh		1.0 MWh (3.6 GJ)
		MW.h		MW⋅h
	kilowatt-hour	kWh		kWh		1.0 kWh (3.6 MJ)
		kW.h		kW⋅h
	watt-hour	Wh		Wh		1.0 Wh (3.6 kJ)
		W.h		W⋅h
Electron- volt multiples
	gigaelectronvolt	GeV		GeV		1.0 GeV (0.16 nJ)
	megaelectronvolt	MeV		MeV		1.0 MeV (0.16 pJ)
	kiloelectronvolt	keV		keV		1.0 keV (0.16 fJ)
	electronvolt	eV		eV		1.0 eV (0.16 aJ)
	millielectronvolt	meV		meV		1.0 meV (0.16 zJ)
Calorie multiples	calorie	Cal		Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	1.0 Cal (4.2 kJ)
	megacalorie	Mcal		Mcal		1.0 Mcal (4.2 MJ)
	kilocalorie	kcal		kcal		1.0 kcal (4.2 kJ)
	calorie	cal		cal		1.0 cal (4.2 J)
	millicalorie	mcal		mcal		1.0 mcal (4.2 mJ)
pound/ ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl		ft⋅pdl		1.0 ft⋅pdl (0.042 J)
	foot-pound force	ftlbf		ft⋅lbf		1.0 ft⋅lbf (1.4 J)
		ftlb-f		ft⋅lbf
	inch-pound force	inlbf		in⋅lbf		1.0 in⋅lbf (110 mJ)
		inlb-f		in⋅lbf
	inch-ounce force	inozf		in⋅ozf		1.0 in⋅ozf (7.1 mJ)
		inoz-f		in⋅ozf
	horsepower-hour	hph		hp⋅h		1.0 hp⋅h (0.75 kWh)
British thermal unit	British thermal unit	Btu		Btu	The International Steam Table British thermal unit is used. For others, see the full list.	1.0 Btu (1.1 kJ)
		BTU		BTU
TNT-based units	gigatonne of TNT	GtTNT		(none)		1.0 gigatonne of TNT (4.2 EJ)
	gigaton of TNT	GtonTNT		(none)
	megatonne of TNT	MtTNT		(none)		1.0 megatonne of TNT (4.2 PJ)
	megaton of TNT	MtonTNT		Mt
	kilotonne of TNT	ktTNT		(none)		1.0 kilotonne of TNT (4.2 TJ)
	kiloton of TNT	ktonTNT		kt
	tonne of TNT	tTNT		(none)		1.0 tonne of TNT (4.2 GJ)
	ton of TNT	tonTNT		(none)
Other
	Hartree	Eh		Eh		1.0 Eh (27 eV)
	rydberg	Ry		Ry		1.0 Ry (14 eV)
	tonne of oil equivalent	toe		toe		1.0 toe (42 GJ)
	barrel of oil equivalent	BOE		BOE		1.0 BOE (6.1 GJ)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)			Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1.0 cubic foot of natural gas (1.1 MJ)

Force

Force
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	giganewton	GN		GN	Allows triple output units. See: full list.	1.0 GN (220,000,000 lbf)	GN LT-f GN LTf GN ST-f GN STf
	meganewton	MN		MN	Allows triple output units. See: full list.	1.0 MN (220,000 lbf)	MN LT-f MN LTf MN ST-f MN STf
	kilonewton	kN		kN	Allows triple output units. See: full list.	1.0 kN (220 lbf)	kN LT-f kN LTf kN ST-f kN STf
	newton	N		N		1.0 N (0.22 lbf)	N lb-f N lbf N oz-f N ozf
	millinewton	mN		mN		1.0 mN (0.0036 ozf)	mN oz-f mN ozf mN gr-f mN grf
	micronewton	μN (uN)		μN		1.0 μN (0.0016 grf)	μN gr-f μN grf
	nanonewton	nN		nN		1.0 nN (1.6×10−6 grf)	nN gr-f nN grf
cgs	megadyne	Mdyn		Mdyn		1.0 Mdyn (2.2 lbf)
	kilodyne	kdyn		kdyn		1.0 kdyn (0.036 ozf)
	dyne	dyn (dyne)		dyn		1.0 dyn (0.016 grf)
	millidyne	mdyn		mdyn		1.0 mdyn (1.6×10−5 grf)
Metric gravitational units	tonne-force	t-f		tf		1.0 tf (9.8 kN; 0.98 LTf; 1.1 STf)
		tf		tf
	kilogram-force	kg-f		kgf		1.0 kgf (9.8 N; 2.2 lbf)
		kgf		kgf
	gram-force	g-f		gf		1.0 gf (9.8 mN; 0.035 ozf)
		gf		gf
	milligram-force	mg-f		mgf		1.0 mgf (9.8 μN; 0.015 grf)
		mgf		mgf
Avoirdupois-based units	poundal	pdl		pdl		1.0 pdl (0.14 N)
	long ton-force	LT-f		LTf		1.0 LTf (10.0 kN)	LT-f ST-f
		LTf		long ton-force			LTf STf
	short ton-force	ST-f		STf		1.0 STf (8.9 kN)	ST-f LT-f
		STf		short ton-force			STf LTf
	pound-force	lb-f		lbf		1.0 lbf (4.4 N)
		lbf		lbf
	grain-force	gr-f		grf		1.0 grf (640 μN)
		grf		grf

Length

Length
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	megametre	Mm		Mm	US spelling: megameter	1.0 Mm (620 mi)
	kilometre	km		km	US spelling: kilometer	1.0 km (0.62 mi)	km mi
	metre	m		m	US spelling: meter	1.0 m (3 ft 3 in)	m ft m ftin
	centimetre	cm		cm	US spelling: centimeter	1.0 cm (0.39 in)	cm in
	millimetre	mm		mm	US spelling: millimeter	1.0 mm (0.039 in)	mm in
	micrometre	μm (um)		μm	US spelling: micrometer	1.0 μm (3.9×10−5 in)
	nanometre	nm		nm	US spelling: nanometer	1.0 nm (3.9×10−8 in)
non-SI metric	ångström	Å (angstrom)		Å		1.0 Å (3.9×10−9 in)
Imperial & US customary	mile	mi		mi		1.0 mi (1.6 km)	mi km
	furlong	furlong		(none)		1.0 furlong (660 ft; 200 m)
	chain	chain		(none)		1.0 chain (66 ft; 20 m)
	rod	rd		rd	For other names of this unit see the full list.	1.0 rd (17 ft; 5.0 m)
	fathom	fathom		(none)	fathom ≡ 6 ft	1.0 fathom (6.0 ft; 1.8 m)
	yard	yd		yd	assumes the international definition	1.0 yd (0.91 m)
	foot	ft (foot)		ft	long code "foot" outputs foot (and never feet) Use of ′ and ″ symbols violates MOSNUM so is not provided.	1.0 ft (0.30 m)	ftin (feet and inches) ft m (foot m)
	inch	in		in	Use of ′ and ″ symbols violates MOSNUM so is not provided.	1.0 in (25 mm)	in cm in mm
Other	nautical mile	nmi		nmi	the international standard nautical mile For other nautical miles see the full list.	1.0 nmi (1.9 km; 1.2 mi)
	parsec	pc		pc		1.0 pc (3.3 ly)
	light-year	ly		ly		1.0 ly (63,000 AU)
	astronomical unit	AU		AU		1.0 AU (150,000,000 km; 93,000,000 mi)
	lunar distance	LD		LD		1.0 LD (380,000 km; 240,000 mi)

Mass

Mass
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	kilogram	kg		kg	Allows triple output units. See: full list.	1.0 kg (2.2 lb)	kg lb kg st
	gram	g		g		1.0 g (0.035 oz)	g oz
	milligram	mg		mg		1.0 mg (0.015 gr)	mg gr
	microgram	μg (ug)		μg		1.0 μg (1.5×10−5 gr)
non-SI metric	tonne	t		t	Allows triple output units. See: full list.	1.0 t (0.98 long tons; 1.1 short tons)	t LT t ST
	metric ton	MT		t			MT LT MT ST
Avoirdupois	long ton	LT		(none)	2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	1.0 long ton (1.0 t)	LT t LT MT LT ST
		long ton		long ton
	short ton	ST		(none)	2,000 lb used mostly in the US. Allows triple output units. See: full list.	1.0 short ton (0.91 t)	ST t ST MT ST LT
		short ton		short ton
	stone	st		st	14 lb used previously in the British Commonwealth except Canada. Allows triple output units. See: full list.	1.0 st (14 lb; 6.4 kg)	st kg st lb
	pound	lb		lb	Allows triple output units. See: full list.	1.0 lb (0.45 kg)	lb kg lb st
	ounce	oz		oz		1.0 oz (28 g)	oz g
	drachm	drachm		(none)		1.0 drachm (1.8 g)
	drachm	dram		(none)
	grain	gr		gr	equivalent to the troy grain	1.0 gr (0.065 g)
Troy	troy ounce	ozt		ozt		1.0 ozt (1.1 oz; 31 g)
other	carat	carat		(none)		1.0 carat (0.20 g)

Speed

Speed
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	metre per second	m/s		m/s	US spelling: meter per second	1.0 m/s (3.3 ft/s)	m/s ft/s (m/s foot/s)
non-SI metric	kilometre per hour	km/h		km/h	US spelling: kilometer per hour	1.0 km/h (0.62 mph)	km/h mph
Imperial & US customary	mile per hour	mph		mph		1.0 mph (1.6 km/h)	mph km/h mph kn
	foot per second	ft/s (foot/s)		ft/s	long code "foot/s" outputs foot per second (and never feet)	1.0 ft/s (0.30 m/s)	ft/s m/s
Maritime units	knot	kn (knot)		kn		1.0 kn (1.9 km/h; 1.2 mph)	kn mph

Temperature

Temperature
(Full list)

system	unit	unit- code		symbol	notes	sample default conversion	combination output units
SI	K	K		K	Allows triple output units. See: full list.	1.0 K (−272.15 °C; −457.87 °F)	K °C (K C) K °R (K R) K °F (K F)
	°C	°C (C)		°C		1.0 °C (33.8 °F)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	°R	°R (R)		°R		1.0 °R (0.556 K; −458.670 °F; −272.594 °C)	°R K (R K) °R °C (R C) °R °F (R F)
	°F	°F (F)		°F		1.0 °F (−17.2 °C)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|F-change}} warmer Result: 5 °C (9 °F) warmer
	Fahrenheit change	F-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder

Torque

Torque
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
Industrial
SI	newton-metre	Nm		N⋅m	Triple combinations are also possible. See the full list.	1.0 N⋅m (0.74 lbf⋅ft)	Nm kg.m Nm lb.ft
Non-SI metric	kilogram metre	kg.m		kg⋅m		1.0 kg⋅m (9.8 N⋅m; 7.2 lb⋅ft)	kg.m Nm kg.m lb.ft
Imperial & US customary	pound force-foot	lb.ft		lb⋅ft		1.0 lb⋅ft (1.4 N⋅m)	lb.ft Nm lb.ft kg-m
Scientific
SI	newton-metre	N.m		N⋅m	Triple combinations are also possible. See the full list.	1.0 N⋅m (0.74 lbf⋅ft)	N.m kgf.m N.m lbf.ft
Non-SI metric	kilogram force-metre	kgf.m		kgf⋅m		1.0 kgf⋅m (9.8 N⋅m; 7.2 lbf⋅ft)	kgf.m N.m kgf.m lbf.ft
Imperial & US customary	pound force-foot	lbf.ft		lbf⋅ft		1.0 lbf⋅ft (1.4 N⋅m)	lbf.ft N.m lbf.ft kgf.m

Volume

Volume
(Full list)

system	unit	unit- code		symbol or abbrev.	notes	sample default conversion	combination output units
SI	cubic metre	m3		m3	US spelling: cubic meter one kilolitre	1.0 m3 (35 cu ft)
	cubic centimetre	cm3		cm3	US spelling: cubic centimeter one millilitre	1.0 cm3 (0.061 cu in)
		cc		cc
	cubic millimetre	mm3		mm3	US spelling: cubic millimeter	1.0 mm3 (6.1×10−5 cu in)
non-SI metric	kilolitre	kl		kl	US spelling: kiloliter one cubic metre	1.0 kl (35 cu ft)
		kL		kL
	litre	l		L	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	1.0 L (0.22 imp gal; 0.26 US gal)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L		L			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl		cl	US spelling: centiliter	1.0 cl (0.35 imp fl oz; 0.34 US fl oz)
		cL		cL
	millilitre	ml		ml	US spelling: milliliter one cubic centimetre	1.0 ml (0.035 imp fl oz; 0.034 US fl oz)	ml impoz ml USoz ml U.S.oz
		mL		mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cubic yard	cuyd		cu yd		1.0 cu yd (0.76 m3)
	cubic foot	cuft (cufoot)		cu ft	long code "cufoot" outputs cubic foot (and never feet)	1.0 cu ft (0.028 m3)
	cubic inch	cuin		cu in		1.0 cu in (16 cm3)
Imperial	imperial barrel	impbbl		imp bbl	36 imp gal	1.0 imp bbl (160 L; 36 imp gal; 43 US gal)
	imperial bushel	impbsh		imp bsh	8 imp gal	1.0 imp bsh (36 L; 8.0 imp gal; 8.3 US dry gal)
		impbu		imp bu
	imperial gallon	impgal		imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	1.0 imp gal (4.5 L; 1.2 US gal)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imperial quart	impqt		imp qt	1/4 imp gal or 40 imp fl oz	1.0 imp qt (1,100 ml; 38 US fl oz)
	imperial pint	imppt		imp pt	1/8 imp gal or 20 imp fl oz	1.0 imp pt (0.57 L)
	imperial fluid ounce	impoz (impfloz)		imp fl oz	1/160 imp gal	1.0 imp fl oz (28 ml; 0.96 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	US barrel	USbbl		US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	1.0 US bbl (120 L; 32 US gal; 26 imp gal)
		U.S.bbl		U.S. bbl
	barrel	oilbbl		bbl	42 US gal	1.0 bbl (0.16 m3)
	US beer barrel	USbeerbbl (usbeerbbl)		US bbl		1.0 US bbl (120 L; 31 US gal; 26 imp gal)
		U.S.beerbbl (usbeerbbl)		U.S. bbl
	US gallon	USgal		US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	1.0 US gal (3.8 L; 0.83 imp gal)	USgal l USgal L USgal impgal
		U.S.gal		U.S. gal			USgal l USgal L USgal impgal
	US quart	USqt		US qt	1/4 US gal or 32 US fl oz	1.0 US qt (950 ml)
		U.S.qt		U.S. qt
	US pint	USpt		US pt	1/8 US gal or 16 US fl oz	1.0 US pt (0.47 L; 0.83 imp pt)
		U.S.pt		U.S. pt
	US fluid ounce	USoz (USfloz)		US fl oz	1/128 US gal	1.0 US fl oz (30 ml)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)		U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry barrel	USdrybbl		US dry bbl	105/32 US bsh	1.0 US dry bbl (0.12 m3)
		U.S.drybbl		U.S. dry bbl
	US bushel	USbsh		US bsh	2150.42 cubic inches by definition	1.0 US bsh (35 L; 8.0 US dry gal; 7.8 imp gal)
		U.S.bsh		U.S. bsh
	US bushel	USbu		US bu	2150.42 cubic inches by definition	1.0 US bu (35 L; 8.0 US dry gal; 7.8 imp gal)
		U.S.bu		U.S. bu
	US dry gallon	USdrygal		US dry gal	1/8 US bsh Allows triple output units. See: full list.	1.0 US dry gal (4.4 L)	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal		U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry quart	USdryqt		US dry qt	1/32 US bsh	1.0 US dry qt (1,100 ml)
		U.S.dryqt		U.S. dry qt
	US dry pint	USdrypt		US dry pt	1/32 US bsh	1.0 US dry pt (550 ml)
		U.S.drypt		U.S. dry pt

Extra

Pressure
(Full list)

	unit	unit- code		symbol or abbrev.		sample default conversion
	gigapascal	GPa		GPa		1.0 GPa (150,000 psi)
	megapascal	MPa		MPa		1.0 MPa (150 psi)
	kilopascal	kPa		kPa		1.0 kPa (0.15 psi)
	hectopascal	hPa		hPa		1.0 hPa (0.015 psi)
	pascal	Pa		Pa		1.0 Pa (0.00015 psi)
	millipascal	mPa		mPa		1.0 mPa (1.5×10−7 psi)
	millibar	mbar		mbar		1.0 mbar (1.0 hPa)
		mb		mb
	decibar	dbar		dbar		1.0 dbar (10 kPa)
	bar	bar		(none)		1.0 bar (100 kPa)
	kilobarye	kBa		kBa		1.0 kBa (1.0 hPa)
	barye	Ba		Ba		1.0 Ba (0.10 Pa)
	standard atmosphere	atm		atm		1.0 atm (100 kPa)
	torr	Torr		Torr		1.0 Torr (0.13 kPa)
	millimetre of mercury	mmHg		mmHg		1.0 mmHg (0.13 kPa)
	inch of mercury	inHg		inHg		1.0 inHg (3.4 kPa)
	pound per square inch	psi		psi		1.0 psi (6.9 kPa)

Fuel efficiency

Fuel efficiency

	unit	unit- code			notes		combinations
	kilometres per litre	km/l (km/L)			Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)			Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)			Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp					mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)			Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi					impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)			As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).

Population density

Population density

	unit	unit- code			notes		combinations
	inhabitants per square kilometre	PD/km2			PD stands for population density, i.e. humans (inhabitants)		PD/km2 PD/sqmi
	per square kilometre	/km2			Used when the word 'inhabitants' would be inappropriate.		/km2 /sqmi
	inhabitants per hectare	PD/ha					PD/ha PD/acre
	per hectare	/ha					/ha /acre
	inhabitants per square mile	PD/sqmi			PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/km2
	per square mile	/sqmi			Used when the word 'inhabitants' would be inappropriate.		/sqmi /km2
	inhabitants per acre	PD/acre					PD/acre PD/ha
	per acre	/acre					/acre /ha

Cost per unit mass

Cost per unit mass

	unit	unit- code			notes		combinations
	dollars per pound	$/lb			"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg					(none)
	dollars per troy ounce	$/ozt			12 troy ounces in 1 troy pound		(none)

Unsupported units

• For Cup (unit), which has ambiguities, see Template:Cups.
• For US tablespoon, see Template:tbspUS
• For US teaspoon, see Template:tspUS

'per' units: kg/ha, miles per gallon

When using a slash (/), a unit like kg/ha is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.

• {{convert|1000|kg/ha}} → 1,000 kilograms per hectare (890 lb/acre)
• {{convert|350|/in2}} → 350 per square inch (54/cm²)

Population density (inhabitants per square mile) can be converted using

• {{convert|10|PD/sqmi|PD/km2}} → 10 inhabitants per square mile (3.9/km²)

Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted

• {{convert|26|mpgUS|l/100km mpgimp}} → 26 miles per US gallon (9.0 l/100 km; 31 mpg_‑imp)

Units of difference: Expressing a change or difference in temperature

We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:

• {{convert|10|C}} → 10 °C (50 °F) (standard temperature conversion)
• {{convert|10|-|15|C}} → 10–15 °C (50–59 °F) (standard temperature range conversion)

When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C, |F and |K), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change, |F-change and |K-change.

Compare the following two examples with the two above:

• {{convert|10|C-change}} → 10 °C (18 °F) increase in temperature
• {{convert|10|-|15|C-change}} → 10–15 °C (18–27 °F) warmer than normal

To produce multiple units in the output:

• {{convert|10|C-change|F-change K-change}} → 10 °C (18 °F; 10 K) difference

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → 1 yard 2 feet 3 inches (1.60 m)
• {{convert|2|ft|3|in|cm}} → 2 feet 3 inches (69 cm)
• {{convert|1|lb|5|oz|g}} → 1 pound 5 ounces (600 g)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert|2|m|ftin}} → 2 metres (6 ft 7 in)
• {{convert|2|m|ft in}} → 2 metres (6.6 ft; 79 in), using a space, returns the decimal point

Default behavior, for comparison:

• {{convert|2|m}} → 2 metres (6 ft 7 in)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|3.39|$/USgal|$/L}} → $3.39 per US gallon ($0.90/L)
• {{convert|10000|€/ha|€/acre}} → €10,000 per hectare (€4,000/acre)
• {{convert|10|¢/mi|¢/km}} → 10 cents per mile (6.2 ¢/km)
• {{convert|1500|¥/lb|¥/kg}} → ¥1,500 per pound (¥3,300/kg)

You can also set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → €10 per mile (€6.2/km)

It is not possible to convert the currency:

• {{convert|10|$/lb|€/kg}} → $10 per pound () Template:Nay

So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) Template:Nay

Using convert inside templates

For use in templates such as infoboxes, {{convert}} has these options:

Handling errors

• Parameter |error=x replaces the need to use {{#iferror|...}} to check for errors,

If no error occurs in the conversion, |error=x has no effect. Otherwise, the result is x (no error occurs).

Examples:

• {{convert|123|kcal|error=This text has no effect because the conversion works.}} → 123 kilocalories (510 kJ)
• {{convert|123 calories (per biscuit)|kcal|error=This text is displayed instead of an error.}} → This text is displayed instead of an error.
• {{convert|123 calories (per biscuit)|kcal|error=}} →    (nothing is displayed)

Pre-formatting fraction input

• Module:Convert/helper can read regular input and pre-format it into {{convert}}-accepted input. Note this function does not have the full capabilities of the convert template; it only converts fractions (and horse race distances)

Your template can accept |input=16 7/8 and use {{#invoke:convert/helper|number|16 7/8}} →

Using a Wikidata property

• Adding the Wikidata property code, like code |input=P2073, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.

Note: to return that property value for an other article, use |qid=.

Example for Template:Wikidata property link of [[d:Special:EntityPage/QTEMPLATE:GET QID| (QTEMPLATE:GET QID)]]:

• {{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}} → P2073
• {{convert|input=P2073|qid=Q1056131|km|abbr=on}} → P2073
• {{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}} → P2073

For example see Template:Infobox telescope.

Sometimes a property may have more than one value against it in Wikidata. You can use the |qual= parameter to specify which of the values you want to use.

Example for Template:Wikidata property link: Note: this example uses |qid=Q1513315 (testing for (Q1513315))

• (Q613628): {{convert|input=P2386|qual=Q613628|ft|abbr=on}} → P2386
• (Q1395645): {{convert|input=P2386|qual=Q1395645|ft|abbr=on}} → P2386

Parameter list

Template:Navbar-collapsible
Parameter	Value	Description	Note
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=on	on	Use symbol for all units (default for {{cvt}})	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Same as abbr=on but only for units (e6km → "million km")	Unit display
|abbr=values	values	Show only the input and output numbers; omit units	Unit display
|abbr=~	~	Shows both unit name and symbol for the input	Unit display
|adj=mid|...	mid	User-specified text after the input unit; sets adj=on (adjectival); requires one unnamed parameter	Word adding, adjectival
|adj=on	on	adjectival; unit name is singular and hyphenated	Grammar, adjectival
|adj=pre|...	pre	User-specified text before input unit (prefix); requires one unnamed parameter	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|altitude_ft=N	N	Specifies altitude in feet for a conversion with mach as the input unit	Qualifier
|altitude_m=N	N	Specifies altitude in metres for a conversion with mach as the input unit	Qualifier
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator (raw number)	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br />"	Join values
|disp=br()	br	Join input and output using "<br />(...)"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=semicolon	semicolon	Join input and output using "; "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=(or)	or	Join input and output using " (...)" but with "or" between outputs in a combination	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|...[|...]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output; requires 1 or 2 unnamed parameters	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|...	x	Join input and output using one (or two) unnamed parameter(s) before (and after) the output	Word adding
|error=x	any text	This has no effect if the conversion works; if a conversion error occurs, the result is x (and the original error message is suppressed)	Inside template
|frac=N	Template:Frac (e.g.)	Show number as a fraction with denominator N	Number format, fraction
|frac=-N	⁠3/4⁠ (e.g.)	Show number as a fraction with a horizontal bar	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts a Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Swaps the order of the input and output measurements	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Specifies the Wikidata entity to be used with a property such as input=P2048	Inside template; testing
|qual=Q613628	Q613628 (e.g.)	Specifies a statement qualifier for a Wikidata property	Qualify Wikidata property
|round=N	N	Rounds output value to nearest N which can be 0.5 or 1 or 5 or 10 or 25 or 50	Output precision
|round=each	each	In a range, round each number separately rather than selecting the same rounding precision	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds an invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in €/hectare	Cost per unit No currency conversion happens
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip	flip	Deprecated. Use Template:Mxt	Order
|sing=		Deprecated. Use Template:Mxt	Plurals

Deprecated options

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• disp=flip is deprecated. Use Template:Xt instead
• sing= is deprecated in any situation. Use Template:Xt instead
• Range separator |xx| is deprecated (not MOS compliant). Use Template:Xt instead
• Range separator |*| is deprecated (not MOS compliant). Use Template:Xt instead

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Convert in articles based on its TemplateData.

TemplateData for Convert

Converts measurements to other units.

Template parameters

This template prefers inline formatting of parameters.

Parameter		Description	Type	Status
Value	1	The value to convert.	Number	required
From unit	2	The unit for the provided value. Suggested values km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg Example km	String	required
To units	3	The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space. Suggested values km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg Example mi nmi	String	suggested
Precision or suffix	4	Significant digits after decimal dot or, if negative, exponent of ten.	Number	optional
Link units	lk	Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times. Suggested values in out on off Default off Example on	String	optional
Abbreviation	abbr	Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units). Suggested values in off none on out unit values ~ Default out Example on, unit, in, out, off	String	suggested
Spelling	sp	Spelling of units. Use “us” to display unit names using U.S. spelling. Example us	String	optional
Adjective	adj	Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form. Suggested values mid on pre ri0 ri1 ri2 ri3 off Default off Example on	Unbalanced wikitext	optional
Conversion	disp	Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision. Suggested values b sqbr br comma semicolon or number output number only out output only preunit table tablecen unit unit2 x Example b	String	optional
Ordering	order	“flip” returns converted value first, input value second. Suggested values flip out Example flip	String	optional
Significant figures	sigfig	Indicates the number of significant figures to be used in rounding.	Number	optional
Rounding output	round	The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range.	Number	optional
Thousands separator	comma	Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345'). Default on Example off	Boolean	optional
Sort key	sortable	“on” generates a hidden sort key Example on	Boolean	optional
Spell numbers?	spell	If used, spells input or input and output numbers in words, optionally capitalizing the first Suggested values in In on On Example 'in', 'In', 'on', or 'On'	String	optional
Singular?	sing	If 'yes', uses singular form of units (deprecated) Example yes	Boolean	deprecated
Fraction?	frac	fraction as rounding unit	Number	optional
Currency symbol	$	sets currency symbol in both units Example $=€ will show " €10 per mile (€6.2/km)"	String	optional
Mach altitude (ft)	altitude_ft	Mach (speed) depends on altitude Suggested values 10000	Number	optional
Mach altitude (m)	altitude_m	Mach (speed) depends on altitude	Number	optional
WD property	input	Reads the property value of the item (article), then converts it Example {{convert|input=P2046}} (P2046=area)	String	optional

See also

• {{Cvt}}
• {{Inflation}}, for converting historical prices to their current equivalent
• {{SI units}}
• {{To USD}}, for currency conversions

The above documentation is transcluded from Template:Convert/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.